$ 358.72
Made of ABS Plastic
Simplify your workflow with this user-friendly approach to immunohistochemistry staining. It will accept up to 20 slides on four plastic rails covered with a polymer strip to perfectly hold slides even if tray is held at an angle. When humidity is needed, wells between rails will hold up to one ml of water securely without splashing. The middle wells will hold up to 2 ml each. Rails are raised not only to avoid water touching the slides but to make them more easily retrievable. The base will also hold excess stain solution dripping from the slides. Four rubber feet ensure greater base stability. Units are stackable for space saving purposes. This tray is also suitable not only for routine staining requiring a humid chamber, but is also ideal for Hematology, Cytology and Microbiology laboratories. Manipulation is made safe and easy by using only one hand.
The StainTray has a black base made of tough ABS plastic withstanding a wide range of chemicals (avoid chlorinated hydrocarbons ). It has a clear cover allowing for visual examination. Made of PETG with a temperature range of -20 °C to +60 °C.
Dimensions with cover: 38 W x 24 D x 4.5 H cm (15 W x 9 3/8 D x 1 3/4 H in.)
$ 127.68
The EasyDip Vertical Slide Staining Rack will hold up to 12 microscope slides with dimensions such as 75 x 25 mm, (3 x 1 in.) and even 76 x 26 mm and with a thickness of 1.0 and 1.2 mm. The slides fit into individual slots for free passage and rapid drainage of staining fluids. Since they are placed vertically in the rack and not horizontally, their writing area will not be stained by the fluid, allowing their removal without the use of forceps. The lid completely covers the EasyDip Slide Staining Jar to minimize spill and evaporation. A handle is permanently attached to the rack for easy insertion and removal of slides without your fingers touching the solution. Available in dark gray only. Will resist temperatures between -170 C and +121 C. Autoclavable.
Dimensions: 60 x 64 x 97 mm H (2 1/4 x 2 1/2 x 3 3/4 in. H).
$ 120.09
A user-friendly approach for staining your microscope slides, the EasyDip Slide Staining System has two components: a square staining jar and a 12-position vertical slide rack. Jars can be loosely joined to each other laterally, therefore making sure they are kept in the same order when moved around on the lab counter. As an extra benefit, they are available in 5 different colors to help better identifying contents or applications.
The staining jar being made of resistant acetal plastic will not break like most glass jars do. It will resist most staining agents including alcohol and xylene (but not phenol, iodine or ferric chloride ). The wide stable base offers greater stability while the inside is recessed, allowing for a smaller reagent volume of only 80 ml. Easy to clean and no metals to corrode. Ideal for special stains, frozen sections and special processes. Will resist temperatures between -170 C and +121 C. Autoclavable. Dimensions: 64 x 76 x 92 mm H (2 1/2 x 3 x 3 5/8 in. H).
Each case includes 5 jars (one of each color) and 1 rack M905-12DGY.
$ 101.85
This holder contains up to 6 jars and keeps your workspace tidy, making it easy to organize up to 6 EasyDip slide staining jars. This slide staining jar holder is durable and corrosion resistant.
(The EasyDip Slide Staining Jars pictured below are not included and may be purchased separately.)
$ 152.00
A smaller DissecTable is also available with the same features and benefits as our full sized Dissecting Board, and is perfect for smaller counter area spaces.
Dimensions
330.2 mm x 279.4 mm x 12.5 mm (13 x 11 x 1/2 in H)
$ 173.28
A new and unique approach makes this dissecting board more convenient than any other on the market today. Buying different sizes is no longer necessary, as this board offers a large surface on one side and two smaller ones on the other side.
Made of heavy-duty, stain-resistant thick polyethylene, it will last for years to come without changing shape, bending, or swelling. It will not dull fine surgical blades. To contain fluids, a drain groove is carved all around the edge of the DissecTable.
You will find a large cutting area on one side, including dimensional scales in inches and centimeters, along with a 60 x 80 mm grid made of 48 x 10 mm squares. Six dimensional circles are also printed from 1/8 to 5/8 in. and 4 to 14 mm in diameter. Flip it over, and the other side offers two cutting boards half the size with the same dimensional features printed on each one of them. All corners have rubber feet, giving more stability to the working surface.
Dimensions: 575 mm x 400 mm x 12.5 mm (23 x 16 x 1/2 in H)
Subscribe to our newsletter and always be the first to hear about what is happening.
© 2024 Teomics.
